Here you will find CND™ PLEXIGEL handy FAQS, P.R.E.P and application videos . Got a question that you can’t find the answer to here? Simply call, slide into our DMs or message us  HERE and we’ll get right back to you.

ABOUT CND™ PLEXIGEL

Why do I need CND™ PLEXIGEL?

PLEXIGEL is newest generation of enhancements, it’s more than just a builder gel, it’s an all-in-one, multi-problem solving, nail enhancement system, that safely lengthens, shapes, builds and protects for 3+ weeks wear

CND™ PLEXIGEL is a versatile & convenient bottled-builder gel system, that provides strength, length and shape, with No Pots. No Tubes, No Mixing, No Mess. Use alone for crystal clarity, or team with CND™ Shellac to provide flawless colour!

PLEXIGEL P.R.E.P

P.R.E.P. is a systematic method of ensuring any CND™ enhancement product, including PLEXIGEL products adhere to the natural nail plate without lifting. It’s essential that proper P.R.E.P or P.E.P is performed before any CND™ product application, to ensure longevity of wear, prevent lifting and chipping and protect the client’s natural nail. So, what does P.R.E.P stand for?

P – Perform a manicure

R – Remove the shine

E- Eliminate Surface Contaminants

P – Purify Nail Plate Layers

Click below to watch CND™ P.R.E.P guidance

Key products required in your P.R.E.P system include

CND™ CoolBlue

CND™ Offly Fast

CND™ SCRUBFRESH™

CND™ Files and Buffers

PLEXIGEL APPLICATION

DIRECTIONS FOR USE OF SHAPER

• Perform P.R.E.P. and apply CND™ PLEXIGEL Bonder to the natural nail.
• Cure for 10 seconds in the CND™ LED Lamp using preset button 1.
• Apply two layers of CND™ PLEXIGEL Shaper to the nail, sealing the free edge after application. Cure each layer for one minute in the CND™ LED Lamp using preset button 2B.
• Apply CND™ PLEXIGEL Protector Top Coat and cure in the CND™ LED Lamp using preset button 3.
• If using CND™ SHELLAC™ Gel Polish, skip Protector Top Coat and CND™ SHELLAC™ Base Coat and apply 2 layers of CND™ SHELLAC™ Color. Cure each layer for one minute in the CND™ LED Lamp using preset button 2S. Finish with a layer of CND™ SHELLAC™ Top Coat and cure using preset button 3.

DIRECTIONS FOR USE OF BUILDER

• Perform P.R.E.P. and apply a tip or form.
• Apply a layer of CND™ PLEXIGEL Bonder to the natural nail. Cure for 10 seconds in the CND™ LED Lamp using preset button 1.
• Sculpt nails to the preferred length and shape using CND™ PLEXIGEL Builder Gel, curing each layer for one minute in the CND™ LED Lamp using preset button 2B.
• Shape and refine using CND™ files and buffers, then cleanse the nail.
• Apply CND™ PLEXIGEL™ Protector Topcoat and cure in the CND™ LED Lamp using preset button 3.
• If using CND™ SHELLAC™ Gel Polish, skip Protector Top Coat and CND™ SHELLAC™ Base Coat and apply 2 layers of CND™ SHELLAC™ Color. Cure each layer for one minute in the CND™ LED Lamp using preset button 2S. Finish with a layer of CND™ SHELLAC™ Top Coat and cure using preset button 3.

CND™ PLEXIGEL BUILDER ON A TIP

Builder on a tip Application Guide
Builder on a form Application Guide

CND™ PLEXIGEL SHAPER OVER A NATURAL NAIL

CND™ PLEXIGEL SHAPER SCULPTED ON A FORM

PLEXIGEL FAQ's

Does the natural nail need to be filed prior to applying CND™ PLEXIGEL?

CND™ PLEXIGEL is a gel enhancement system that requires P.R.E.P for proper adhesion. Light shine removal is needed using a 240-grit buffer or medium enhancement E-file bit. P-Preform a manicure R-Remove shine E-Eliminate surface contaminants P-Purify nail plate layers

When using CND™ SHELLAC™ Gel Polish over CND™ PLEXIGEL, should the top film be removed prior to colour application?

If the enhancement doesn’t require shaping or finishing, you can apply CND™ SHELLAC™ Gel Polish directly over the top film of the gel.

Can I just use my CND™ SHELLAC™ Topcoat over CND™ PLEXIGEL instead of Protector Top Coat?

For clear enhancements, and best results it is recommend to finish using CND™ PLEXIGEL Protector Top Coat. If using CND™ SHELLAC™ Gel Polish over CND™ PLEXIGEL, finish with CND™ SHELLAC™ Original (or DURAFORCE™Top Coat) instead of Protector Top Coat.

My client has experienced cracking or chipping, what am I doing wrong?

If your client experiences cracking or chipping, you may be applying the gel too thin. Try applying an additional layer and ensure to seal the edge of all layers for best wear

Could CND™ SHELLAC™ Base Coat be used instead of CND™ PLEXIGEL Bonder?

No. To guarantee the longevity of a CND™ PLEXIGEL service, CND™ PLEXIGEL Bonder must be used to anchor the enhancement to the nail and act as an attraction layer during sculpting.

Can CND™ PLEXIGEL be cured in the CND™ UV Lamp?

The CND™ UV Lamp has a beautiful broad distribution of wave length and should do a good job, however since CND™ no longer manufactures the UVLamp, we did not test it with CND™ PLEXIGEL.

We recommend the CND™ LED Lamp as top choice for proper curing. CND™ PLEXIGEL was calibrated to properly cure in both of our CND™ LED lamps (closed and open units). If another lamp is used, it might lead to under or over curing and could impact the wear results of the product.

Can CND™ PLEXIGEL be properly cured with a mini hand-held LED light?

Mobile or mini LED lights have a wide range of light output, which makes it difficult to calibrate their effectiveness in proper curing with CND™PLEXIGEL. We recommend using the CND™ LED Lamp that is calibrated to work as a system together with the CND™ Custom Cure protocol to ensure proper and comfortable cure.

Why do some of my clients experience heat when curing?

CND™ PLEXIGEL is a monomer-rich formula and some clients may experience heat sensitivity. Reference the CND™ Custom Cure protocol blog post

What does flash cure do?

Flash Cure means to partially cure the gel for 2-3 ‘flashes’ in the CND™LED Lamp for client comfort and product control. Using the CND™ LED Lamp with button 1 for 2-3 pulses will reduce the output by 50%, which will control the heat sensation. Once the gel is applied to entire hand, cure for one minute using present button 2B for complete cure.

• #Education
• #HowTo
• #Nails